Hey guys,
Tonight, Elite Recognized Developer Rebellos and myself managed two very major breakthroughs for Samsung Exynos based devices.
1. Stable implementation of the Open Galaxy Bootloader (based on Uboot)
What's this mean? We can now work INSIDE the Samsung TrustZone on production devices! This means some serious debugging of bootloaders is possible.
2. fastboot on the Galaxy Camera
What does this REALLY mean? It means that not only do we have a way to get away from Samsung closed source bootloaders, but we can now boot TOTALLY from SDCard on the Galaxy Camera and the Galaxy S3.... What's that mean? We can fix brick-bugged Galaxy S3 devices!
I need a Galaxy S3 to work with. Anyone have a brick or a GS3 they're not using? I need it.
I will be performing the following:
1. EMMC Disable hardware mod (can be undone later)
2. UART hookups for debugging and working in fastboot mode.
3. attempting to rework GS3 Ramdisk for SDCard boot.
4. recreating the proper partition structure on a 16 gig.
From the current track record, i'm guessing that just about everyone will need this in a year or so. We hope to have this ready fairly quickly so anyone can just open their device, drop a bead of solder over a resistor, insert an SDCard and boot up again.
The further implications of this are: directly booting ubuntu, Chrome OS, WebOS or just about anything else... This tool will make it easy!
I estimate this will take 3-6 weeks of research. If you can donate a GS3 or do an extended loan, it will help out many people with bricked EMMCs. The device can even be bricked.
Tonight, Elite Recognized Developer Rebellos and myself managed two very major breakthroughs for Samsung Exynos based devices.
1. Stable implementation of the Open Galaxy Bootloader (based on Uboot)
Code:
��BL2
U-Boot 2010.12-00051-g02bdbef-dirty (Dec 23 2012 - 01:53:11) for EXYNOS4_GALAXY
CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
APLL = 1000MHz, MPLL = 800MHz
DRAM: 1 GiB
[I2C] CLK_GATE_IP_PERIL: 0xFFFFFFFF, enabling channel 7
[I2C] channel 7 initialised with freq 400000 and timeout 1000000.
[I2C] ePrescaler: 16 nPrescaler: 15.
[I2C->ERR] Timeout Slave Address
pmic_s5m8767_init set reg 0xE to 0x6F with mask 0x0
pmic_s5m8767_init set reg 0x5A to 0x58 with mask 0x0
pmic_s5m8767_init set reg 0x5B to 0xB4 with mask 0x0
pmic_s5m8767_init set reg 0xA to 0xE with mask 0xE
pmic_s5m8767_init set reg 0x11 to 0xE with mask 0x0
pmic_s5m8767_init set LDO2 to enable 0x1
pmic_s5m8767_init set LDO4 to enable 0x1
pmic_s5m8767_init set LDO5 to enable 0x0
pmic_s5m8767_init set LDO6 to enable 0x1
pmic_s5m8767_init set LDO7 to enable 0x1
pmic_s5m8767_init set LDO8 to enable 0x1
pmic_s5m8767_init set LDO9 to V 1800
pmic_s5m8767_init set LDO10 to enable 0x1
pmic_s5m8767_init set LDO11 to V 1950 with enable 0x1
pmic_s5m8767_init set LDO12 to enable 0x1
pmic_s5m8767_init set LDO13 to enable 0x0
pmic_s5m8767_init set LDO14 to V 1950 with enable 0x1
pmic_s5m8767_init set LDO15 to enable 0x1
pmic_s5m8767_init set LDO16 to enable 0x1
pmic_s5m8767_init set LDO18 to enable 0x1
pmic_s5m8767_init set LDO19 to V 1800 with enable 0x1
pmic_s5m8767_init set LDO20 to V 3300
pmic_s5m8767_init set LDO21 to V 3300
pmic_s5m8767_init set LDO22 to V 2800
pmic_s5m8767_init set LDO27 to V 1500
PMIC: S5M8767
====================
S5M8767 PMIC registers
====================
ID = 0x05
ONSRC = 0x01
STATUS1 = 0x11
STATUS2 = 0x11
STATUS3 = 0x07
IRQ1 = 0x09
IRQ2 = 0x38
IRQ3 = 0x00
PWROFFSRC = 0x00
PMIC_RTC_WTSR_SMPL_REG = 0x80
S5M8767_REG_BUCHG = 0x6f
i2c_gpio_new_port virtual channel 0 registered
max77693 charger PMIC rev = PASS2, REG_ID2: 0x4
BL1 version: 20111128
Checking Boot Mode... EMMC4.41
REVISION: 1.1
[ERROR] response timeout error : 00000104 cmd 1
FAIL: waiting for status update.
MMC Device 0: 0 MB
MMC Device 1: 7580 MB
MMC Device 2 not found
FAIL: waiting for status update.
FAIL: waiting for status update.
mmc read failed
*** Warning - using default environment
Hit any key to stop autoboot: 0
GALAXY #
GALAXY #2. fastboot on the Galaxy Camera
Code:
adam@adam-Desktop:~/Desktop/GCAMBoot$ sudo fastboot devices
SMDKEXYNOS-01 fastboot
adam@adam-Desktop:~/Desktop/GCAMBoot$ sudo fastboot boot ./BOOT.bin
downloading 'boot.img'...
OKAY [ 1.642s]
booting...
OKAY [ 0.217s]
finished. total time: 1.859s
adam@adam-Desktop:~/Desktop/GCAMBoot$What does this REALLY mean? It means that not only do we have a way to get away from Samsung closed source bootloaders, but we can now boot TOTALLY from SDCard on the Galaxy Camera and the Galaxy S3.... What's that mean? We can fix brick-bugged Galaxy S3 devices!
I need a Galaxy S3 to work with. Anyone have a brick or a GS3 they're not using? I need it.
I will be performing the following:
1. EMMC Disable hardware mod (can be undone later)
2. UART hookups for debugging and working in fastboot mode.
3. attempting to rework GS3 Ramdisk for SDCard boot.
4. recreating the proper partition structure on a 16 gig.
From the current track record, i'm guessing that just about everyone will need this in a year or so. We hope to have this ready fairly quickly so anyone can just open their device, drop a bead of solder over a resistor, insert an SDCard and boot up again.
The further implications of this are: directly booting ubuntu, Chrome OS, WebOS or just about anything else... This tool will make it easy!
I estimate this will take 3-6 weeks of research. If you can donate a GS3 or do an extended loan, it will help out many people with bricked EMMCs. The device can even be bricked.